Maintaining your HVAC system is essential for comfortable living during any season. There are many annual tasks that you must complete to keep your HVAC system running smoothly, such as tune-ups or replacement of filters or belts.
Your HVAC system can malfunction without proper maintenance, causing serious discomfort and health issues. However, owning a heating system means you should at least understand how it operates. Here is a list of a few actions you may do to aid you in resolving common heater issues without needing expert assistance.
7 Important Tips for Fixing your Heater
1. Change the Filter
Every HVAC system in a home uses an air filter to purge pollutants, dust, and other impurities from the air inside the building. Every three months, the filters should be changed. You should replace this filter once a month if you reside in an urban or industrial region.
This will not only keep your home’s air clean, but it can also improve the effectiveness of your heater. Changing the air filters is not difficult; it can be done by referring to your system’s handbook for guidance.
2. Check Thermostat Batteries
Many home thermostats use batteries to power and illuminate their displays. While these batteries can go for several years without needing to be changed, they can also deplete suddenly. So be sure to stock up on appropriate batteries for your thermostat before the winter weather begins.
3. Check the Gas Valve
Check the gas valve first if you have a gas furnace and your heater isn’t working. In addition, if the valve is closed, turn the lever when it is parallel to the gas line to open the gas valve. It will make it possible for the gas to enter the furnace.
4. Clean Air Vents
Many impurities can be removed from the air using an HVAC air filter. However, these filters can’t prevent minute dust and dirt particles from being trapped in the vents and ductwork of your HVAC system. A great technique is to vacuum and clean your vents.
5. Circuit Breaker
Whether you use gas heating or oil heating, you need electricity to operate. So, if your heating isn’t working, check your home’s circuit breaker panel for any tripped circuit breakers, and reset them.
6. Thermostat Setting
Your heater may not work because someone accidentally changed the thermostat settings or there is a glitch in the thermostat. It’s a good idea to check your thermostat’s settings first and ensure it’s set as required before calling for a heating system repair. If the issue persists and you need a professional, contact the experts at Ease, specialising in heating system repair in Hemet, CA.
7. Clean Furnace Burners
Having trouble starting is one of the most frequent problems that natural gas furnaces run into in the winter. Although there may be several explanations for this issue, clogged furnace burners are perhaps the most frequent.
However, getting to your furnace’s burners can take time and effort. Since these burners are attached to gas lines, they may also be harmful. To maintain your furnace and its parts, it makes sense to work with a professional. Contact Ease for HVAC repair Hemet, CA and the surrounding areas.
Make A Professional Maintenance Service Appointment
You should schedule an HVAC repair service if it has been more than a year. After all, some heater maintenance procedures are too difficult for the average person to handle. Your heater is sure to be in outstanding condition when handled by Ease Experts.
