Some Common AC Problems

• The Thermostat is Broken

There are numerous programmable and non-programmable thermostats available. You could save money by consulting your owner’s manual and reading the operating instructions to avoid paying for an unneeded service call.

• Mechanical Breakdown

Your cooling system is dependent on several mechanical parts. These include belts and bearings, which can lead to problems, poor cooling, or problems with airflow. Oiling bearings and inspecting for stretched or worn belts should be routine maintenance.

• Soiled Filters

It causes the blower to work harder than necessary and will harm comfort. The AC may overheat and shut off at a high limit due to a dirty filter. In this case, you will need to call a specialist for air conditioner repair in Hemet, CA.

• Ignition or Pilot Issues

A dirty pilot, flame sensor, or burner may result in a pilot failure, short cycling, or delayed burner ignition. Other causes of ignition issues include issues with the gas supply or simple wear and tear of an ignition component. In either case, it is better to have a qualified service expert solve these issues.

• Tripped Breakers or Blown Fuses

Overworking is the most frequent reason for a circuit breaker. The device may have to work more to push air through the filter if it has a dirty air filter. Additionally, duct leaks, closed or blocked air registers, and dirty coils might cause the blower to overwork.

• Strange Noises

While certain noises are a natural aspect of operation, others could be an alert or sign of a technical issue. When the bearings in an inducer motor or blower motor start to deteriorate, the motor may start to whine or screech. Dirty burners or problems with airflow could bring on other noises.

• Dirty Evaporator or Condenser Coils

After turning off the condenser’s power, you can hose down the outdoor coil. The indoor evaporator coil can become unclean if the filters are not changed frequently. A qualified service professional will need to clean extremely dirty coils.

• Blower Continually Operates

Several factors can cause a blower to run continually. Check the fan switch on the thermostat before making a call for AC repair in Hemet. An experienced service expert can assess this issue and present possible solutions. If activated, the circuit board may turn on the device to cool it down.

• Leaks of Water

Both high-efficiency furnaces and air conditioners produce condensate. These devices may leak water if the drain pipes are broken or blocked. You should contact a service expert to find the cause of the leak.